Safety Instructions
Indistinguishable From Magic, Inc. (“IF Magic”), product safety warnings and instructions. These warnings and instructions apply to the “IF Magic Platform,” which includes the IF Magic Device, the incorporated software, the IF Magic modules, and the power supply units (PSUs) and AC power cords that were provided with your device.
NOTE: This symbol identifies safety and health messages in these product safety warnings and instructions.
IF Magic products are developed to be safe and effective. Please read this guide for important safety and health information about your device and for the terms of the Limited Warranty that applies to your device. The guide is intended to help you be more comfortable and productive while using this device. Failure to follow the instructions for proper set up, use, and care for your device can increase the risk of serious personal injury, death, or property damage.
This product can expose you to chemicals including Lead which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65warnings.ca.gov.
This device may contain small parts that may be a choking hazard to children under 3 years. Keep small parts away from children.
The IFM Platform and its accessories are not toys. Do not allow small children to play with them because children could hurt themselves or others or damage your device. Keep the IFM Platform and all its parts and accessories out of the reach of small children.
The IFM Platform is not designed or intended for use in any application or situation where failure of any kind of the device could lead to death, serious bodily injury, or severe environmental damage (“high-risk use”). If you elect to use your IFM Platform for a high-risk use, you do so at your own risk.
Parts of the IFM Platform are magnetic and may attract metallic items. To reduce the potential risk of sparks and resulting damage to your device, other objects, and/or possible personal injury, verify the electrical connection areas are free of metallic objects before interconnecting devices or charging connectors. Do not place magnetically sensitive devices, credit cards, other magnetic storage media near your device to reduce the potential for magnetic interference between your device and other devices, possible disruption of medical device operation, or corruption of magnetically stored data.
Radio-frequency emissions and magnetic fields from electronic equipment can negatively affect the operation of other electronic equipment, causing them to malfunction. Although the IFM Platform is designed, tested, and manufactured to comply with regulations governing radio frequency emission in the United States, the wireless transmitters and electrical circuits in the device may cause unintentional interference in other electronic equipment.
Persons with pacemakers should always take the following precautions:
• The American Heart Association recommends that a minimum separation of 15 cm (6 inches) be maintained between a wireless device and a pacemaker to avoid potential interference with the pacemaker.
• Do not carry the IFM Platform in a chest pocket.
• If you have any reason to suspect that interference is occurring immediately turn off the IFM Platform.
If you use a medical device other than a pacemaker, consult the device manufacturer or your physician for information and instructions about the use of other electronic devices near your medical device.
Although the IFM Platform has been tested for safety and compatibility, it contains a radio that could affect other electronic equipment or medical devices (such as pacemakers) under certain circumstances, causing them to malfunction and result in possible injury or death.
• Turn off the IFM Platform in any location where instructed to do so.
• Follow all crew instructions while on an aircraft. Turn off the IFM Platform as instructed by the crew, including for any wireless devices packed in your luggage. Consult airline staff or the crew about using the IFM Platform in flight.
• Follow all the facility rules and posted instructions in areas where cellular or wireless network use is prohibited.
Do not store or carry flammable liquids, gases, or explosive materials in the same compartment as the IFM Platform, its parts, and/or accessories.
Turn off the IFM Platform, and do not remove or install battery chargers, AC adapters, or any other accessory for your device when you are in an area with potentially explosive atmospheres. Areas with potentially explosive atmospheres are often, but not always, posted and may include fueling areas or fuel service stations; below decks on boats or other vessels; fuel and/or chemical transfer and storage facilities; and areas where flammable chemicals or particles, such as grain dust or metal powders have collected in the air. In such areas, sparks can occur and cause an explosion or fire.
Some people may experience a seizure when exposed to flashing lights or patterns in moving images or video games. Even people who have no history of seizures or epilepsy may have an undiagnosed condition that can cause “photosensitive seizures” while watching moving images or video games, such as those that can be created using the IFM Platform.
These seizures may have a variety of symptoms, including lightheadedness, altered vision, eye or face twitching, jerking or shaking of arms or legs, disorientation, confusion, or momentary loss of awareness. Photosensitive seizures may also cause loss of consciousness or convulsions that can lead to injury from falling or striking nearby objects. Immediately stop playing and consult a doctor if you experience any of these symptoms. Parents should watch for or ask their children about the above symptoms — children and teenagers are more likely than adults to experience these seizures. The risk of photosensitive seizures may be reduced by taking the following precautions:
• Sit farther from the video screen.
• Use a smaller video screen.
• Play in a well-lit room.
• Do not play when you are drowsy or fatigued.
If you or any of your relatives have a history of seizures or epilepsy, consult a doctor before playing.
The IFM Platform uses a rechargeable battery. Improper use or misuse of rechargeable batteries may cause injury, death, property damage, and may damage your device or its accessories as a result of battery fluid leakage, fire, overheating, or explosion.
Battery fluid is corrosive and may be toxic. It can cause burns and may be harmful or fatal if swallowed.
To reduce the risk of injury when using rechargeable batteries:
• Keep batteries out of the reach of children.
• Charge your rechargeable battery only with the charger provided with your IFM Platform. Using an improper charging method may result in fire or explosion
• Avoid contact with battery fluid. If a battery leaks:
• Keep the leaked fluid from touching your skin, eyes, clothes, or other surfaces. If the battery fluid contacts your skin, eyes, or clothes, immediately the affected area with water and contact your doctor or other medical provider as appropriate.
• Do not disassemble, crush, open, puncture, shred, short external contacts or circuits, expose to temperature above 40 °C (104 °F), or dispose of batteries in fire or water.
• Do not allow metal objects to touch the battery terminals on the device; they can become hot and cause burns.
• Do not carry or place batteries or battery packs together with other metal objects.
• Do not leave a battery-powered device in direct sunlight for an extended period.
• Do not immerse your battery in water or allow it to become wet.
• Do not use a battery if it has become wet. Do not attempt to dry a battery or battery pack with a hair dryer, in a conventional oven, or in a microwave oven.
• Do not connect batteries directly to wall outlets or car cigarette-lighter sockets.
• Do not strike, throw, step on, or subject batteries to severe physical shock.
• Do not modify or remanufacture, attempt to insert foreign objects into the battery, immerse or expose to water or other liquids, expose to fire, explosion or other hazard.
• Do not recharge batteries near a fire or in extremely hot conditions.
• Dropping your IFM Platform or its battery, especially on a hard surface, can damage the device and its battery. We recommend that you seek professional assistance to inspect your IFM Platform if you believe damage has occurred.
• Never use a damaged battery. If your battery appears scratched, or nicked, immediately place it aside and dispose of it properly. Use of a damaged battery can cause electrical shorts, overheating, and other component failures.
Improper use of the IFM Platform’s battery may result in fire or explosion. Do not heat, open, puncture, mutilate, or dispose of the IFM Platform or its battery in fire. Do not leave or charge the IFM Platform in direct sunlight for an extended period of time. Doing so may cause damage or melt the battery.
IF Magic recommends that you seek professional assistance for all device repairs, including battery replacement, and that you use caution if undertaking do-it-yourself repairs. Opening and/or repairing your device can present electric shock, device damage, fire, and personal injury risks, and other hazards. The lithium-ion battery in the IFM Platform should be serviced or recycled by IF Magic or a professional, and must be recycled or disposed of separately from household waste. Dispose of batteries according to your local environmental laws and guidelines. For more information about battery service and recycling please visit ifmagic.io/sustainability/batteries.
Always select and use an appropriate AC power supply for your IFM Platform. Failure to take the following precautions can result in serious personal injury or death from electric shock or fire or in damage to your device.
To select an appropriate power source for your device:
• We recommend you use the power supply units (PSUs) and AC power cords that were provided with your device.
• Use only AC power provided by a standard (mains) wall outlet. Do not use non-standard power sources, such as generators or inverters, even if the voltage and frequency appear acceptable.
• Confirm that your electrical outlet provides the type of power indicated on the PSU (in terms of voltage [V] and frequency [Hz]). If you are unsure of the type of power supplied to your home, consult a qualified electrician.
• Do not overload your wall outlet, extension cord, power strip, or other electrical receptacle. Confirm that they are rated to handle the total current (in amps [A]) drawn by your device (as indicated on the PSU) and any other devices using the same circuit.
• If AC prongs may be folded for storage, make sure its prongs are fully extended before plugging the AC power supply for the IFM Platform into the power (mains) outlet.
The IFM Platform contains Bluetooth® radio transmitters have been designed, manufactured and tested to meet the Federal Communications Commission (FCC) guidelines for RF exposure and Specific Absorption Rate.
Additional information about RF safety can be found on the FCC website at http://www.fcc.gov/oet/rfsafety.
Opening and/or repairing your device can present electric shock, device damage, fire, and personal injury risks, and other hazards. IF Magic recommends that you seek professional assistance for device repairs, and that you use caution if undertaking do-it-yourself repairs.
Do not place your device or other objects on or near the airbags in vehicles equipped with airbags. Objects placed on or near an airbag may cause serious personal injury or death if the airbag deploys.
The risk of fire, shock or damage to your IF Magic device during cleaning can be reduced by taking the following precautions:
• Unplug all cables and turn your device off before cleaning.
• Only clean the exterior of your device.
• Clean your device with a dry cloth.
• Gently clean the exterior surface of any opening to remove any dust buildup.
• Do not insert objects into any opening.
• Do not attempt to clean connectors through immersion in liquids. Only gently wipe and drywith a clean cloth.
To reduce the risk of fire, shock or damage to your IFM Platform, do not expose it or its accessories to rain, snow or other types of moisture. Do not use the IFM Platform near water or in a damp or excessively humid location (e.g., near a shower, bathtub, sink, or swimming pool, or in a damp basement). To keep the IFM Platform in prime operating condition:
• Do not use your device near heat sources, food, excessive dirt, dust, oil, chemicals, or in strong direct sunlight.
• Do not place objects on top of your device.
• Use only attachments/accessories specified by IF Magic.
• Do not insert objects into the ports, slots or other openings.
• Do not allow dust to build up on the openings.
• Do not dry the IFM Platform with a hair dryer, clothes dryer, conventional, toaster, or microwave oven. If your device becomes wet, gently wipe the exterior with a clean, dry cloth.
Keep plastic bags away from babies and children to avoid the risk of suffocation.
If you let anyone else use the IFM Platform, make sure that they understand the health and safety information in this guide.
Do not place the IFM Platform on uneven or unstable surfaces. Be sure to hold it securely when it is carried and not via an accessory, cable, or cord. Failure to hold the IFM Platform securely could cause it to fall or hit a person or object, which could damage your device, damage other property, or cause personal injury.
The IFM Platform is made of materials commonly used in wearable consumer electronic devices. However, certain people may develop skin irritation due to allergies or sensitivities. To reduce the risk of skin irritation:
• Clean your device regularly.
• Avoid using lotions or other products in locations where the IFM Platform may contact your skin.
• Use with caution if your skin is injured.
If symptoms are severe or persist, consult your physician.
The “Distance Module” that may be used with the IFM Platform is classified as a Class 1 laser product per IEC 60825-1 Ed 3. The “Distance Module” complies with 21 CFR 1040.10 and 1040.11, except for conformance with IEC 60825-1 Ed. 3., as described in Laser Notice No. 56, dated May 8, 2019. Class 1 lasers under the classification rules of the International Electrotechnical Commission are deemed very low risk and "safe under reasonably foreseeable use", including the use of optical instruments for intrabeam viewing. Nevertheless, you should not look directly into the laser beam of the Module.
Class 1 Laser Product Label
Exposed device cables and cords pose a potential tripping hazard. Arrange all cables and cords so that people and pets are not likely to trip over or accidentally pull on them as they move around or walk through the area. Do not allow children to play with cables and cords. To avoid damaging the cords and cables:
• Protect cords from being walked on or crushed.
• Protect cords from being pinched or sharply bent, particularly where they connect to a wall power (mains) outlet, the power supply unit, and the IFM Platform.
• Do not jerk, knot, sharply bend, stretch, or otherwise abuse the power cords. Do not wrap your power cord too tightly, especially around the power brick. Instead, wrap it using loose coils rather than tight angles.
• When positioning your device make sure that the cords are not bent sharply and that the connectors are not pushed against a wall or hard surface.
• Do not expose power cords to heat sources.
• Do not allow pets or children to bite or chew on power cords.
• When disconnecting the power cord, pull on the plug—do not pull on the cord.
• Inspect your power cords and cables regularly. If a power cord or cable becomes warm, frayed, cracked or damaged in any way, stop using it immediately. We recommend that you replace your damaged power cord or cable with a genuine IF Magic replacement power or cable.
• Unplug your charging cable or cord during lightning storms or when unused for long periods.
• Certain types of content, particularly games or movies that make you feel as if you are moving through space or looking down from above, or interactions that involve tracking moving objects.
• Using your device for extended periods without a break.
The IFM Platform may become very warm during normal use. Sustained contact with warm surfaces for long periods of time may cause discomfort or injury. To reduce potential heat-related concerns, follow these guidelines:
• Keep your device and its power adapter in a well-ventilated area when in use or charging. Allow for adequate air circulation under and around the device.
• Use common sense to avoid situations where your skin is in contact with your device or its power adapter when it’s operating or connected to a power source. For example, avoid contact between your body and the IFM Platform when the power adapter is connected to a power source. Take special care if you have a physical condition that affects your ability to detect heat against the body.
• If the IFM Platform is used for long periods, its surface can become very warm. While the temperature may not feel hot to the touch, if you maintain physical contact with the device for a long time, for example if you rest the device on your lap, your skin might suffer a lowheat injury.
• If the IFM Platform is on your lap and gets uncomfortably warm, remove it from your lap and place it on a stable work surface.
• Never place the IFM Platform or AC adaptor on furniture or any other surface that might be marred by exposure to heat since the base of your device and the surface of the AC adaptor may increase in temperature during normal use.
Handle the IFM Platform with care. It is made of metal and plastic and has sensitive electronic components inside. Your device can be damaged if dropped, burned, punctured, or crushed, or if it comes in contact with liquid. If you suspect damage to your device or its battery, discontinue use of your device, as it may cause overheating or injury.
Third-party accessories may be incompatible with the IFM Platform, so we strongly recommend that you purchase and use original IF Magic or IF Magic-licensed devices or accessories only. Use of incompatible or counterfeit accessories, batteries, and charging devices could result in damage to your device and pose a possible risk of fire, explosion, or battery failure leading to serious injuries, damage to your device, or other serious hazards.
Name: The Device
Model: The Device - Bare Edition
Charging Temperature: 0ºC - 45ºC (32ºF - 113ºF)
Operating Temperature: -20ºC - 60ºC (-4ºF - 140ºF)
FCC Compliance Notice
Supplier's Declaration of Conformity
Product Name: The Device
Model: The Device - Bare Edition
Responsible Party: Indistinguishable From Magic, Inc.
Responsible Party Address: 370 Jay St. Floor 7, Brooklyn, NY, 11201
Website: ifmagic.io
FCC ID: 2AC7Z-ESP32WROOM32E
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
RF Exposure Information
This equipment complies with FCC radiation exposure limits set forth for mobile applications in an uncontrolled environment. This equipment is to be installed and operated with a minimum distance of 20 cm between it and your body. This equipment must not be modified in any way or used with any other antenna or transmitter.
Limited Warranty
Only the applicable sales conditions, the descriptions, characteristics, features, presentations and price that we publish and directly present on our website or app, will be regarded as constituting the description of the Product. You are fully responsible for verifying whether Product, as described in the above-mentioned published materials, meet your needs and intended use.
IFM warrants that the physical IFM Product will be free from defects in material and workmanship for a period of one (1) year from the date of purchase (the “Limited Warranty”).
All warranties, if any, for the Product Software are contained in the EULA.
Scope of Limited Warranty
This Limited Warranty applies only to IFM-branded Products purchased directly from IFM.
Warranty Procedures and Remedies
During the applicable warranty period, if you are unable to resolve a product problem for a physical Product and IFM determines the Product is or may be defective, a Return Material Authorization (RMA) will be issued to you. Following receipt of an RMA number, you shall return the product to IFM, freight prepaid. Upon verification of warranty, IFM will, at its option, repair or replace the product and return it to you freight prepaid. If the product is not under warranty, you may have IFM repair the unit on a fee basis or return it. No services are handled at your site under this Limited Warranty unless IFM otherwise determines in its sole discretion.
Warranty Periods
The Limited Warranty period for a Product starts on the date of purchase from IFM. You may be required to provide a proof of purchase as a condition of receiving a warranty service.
Warranty Exclusions
No warranty will apply if the Product (1) has been altered, except by IFM; (2) has not been installed, operated, repaired, or maintained in accordance with instructions supplied by IFM in the applicable product documentation [add link]; (3) has been used in violation of the license granted by IFM; or (4) has been subjected to unreasonable physical, thermal or electrical stress, misuse, negligence, or accident. The Limited Warranty does not extend to any damages, malfunctions, or non-conformities caused by (1) normal wear due to product use; (2) use of non-IFM furnished equipment or software with products; or (3) failure to implement all new updates to the Product Software.